UNIVERSAL SELF-COPYING GATE REMOTE CONTROL

The universal self-copying remote control will allow us to copy the signal to the gate, alarm, etc. It has four programmable buttons. Thanks to the movable cover for the buttons, it will prevent their unwanted pressing.

NOTE: Before purchasing, please check that your remote control operates on a fixed code and 433.92 MHz frequency.

PRODUCT FEATURES:

✅ Code copying

✅ Deletion of codes

✅ Restoration of codes

✅ Four buttons

✅ Easy to use

COPYING INSTRUCTIONS

✅ Reset memory:

1. Clear remote control history code
2. Press buttons A and B continuously until the LED flashes 3 times
3. Release button B (While still holding A) and slowly press button B 3 times until the LED flashes.
4. Release both buttons, complete the code deletion.

✅ Cloning the remote control:

1. Copy the code from the original transmitter
2. Place the remote control as close as possible to the original transmitter.
3. Press and hold the button of the original transmitter, then press and hold button A of the self-copying remote control until you see the duplicator LED flashing
4. Release both buttons, finish copying the code, copy another button in the same way

TECHNICAL SPECIFICATIONS:

✅ Product code: 10040

✅ Frequency: 433.92 MHz (fixed code)

✅ 4 channels to be programmed

✅ Robust metal casing

✅ A27/12V battery

✅ Operating current: 10mA

✅ Voltage: DC12V

✅ Dimensions: 55mm x 29mm x 14mm

KIT INCLUDES:

☑️ Factory new remote control

☑️ Key ring

☑️ Instruction manual